Data logger accessories

Solar powered remote JPEG camera CAM-2.0M
The CAM-2.0M is a compact low power weatherproof 2.0M widescreen (16:9) JPEG camera that can be connected to a solar or DC powered ML-x17ADS data logger. The CAM-2.0M can take color pictures during daylight and B/W pictures at night up to 6m with the support of an integrated IR850 LED array.
IP67 waterproof connectors CON-Px
The CON-Px series exists out of assembly time saving waterproof (IP67) connectors with small form factor (M8). The chassis parts are provided with 20cm long stripped wires for easy connection to internal PCB terminal connectors. The cable parts are provisioned with insulation-piercing contacts (IDC), so no welding or wire stripping in the field required.

Both chassis and cable parts are available with 3/4 pins and as male/female, so you can make a combination of up to 4 non-interchangable connections.

CON-P3-F-203 pin female chassis part, mates with cable part: CON-P3-M-IDC
CON-P4-F-204 pin female chassis part, mates with cable part: CON-P4-M-IDC
CON-P3-M-203 pin male chassis part, mates with cable part: CON-P3-F-IDC
CON-P4-M-204 pin male chassis, mates with cable part: CON-P4-F-IDC
PA66/IP68 waterproof external USB connector CON-USB
The CON-USB is a PA66/IP68 waterproof external USB-B connector. The set exists out of chassis part with a 16mm diameter thread, a termination cap and internal cable assembly with female connector that mates with the internal USB male connector of the ML-x17 datalogger.
PA66/IP68 waterproof external USB connector EDGE
The Iridium EDGE with embedded antenna has global data coverage and is a very suitable satelitte transceiver for low power data logging applications.
Low power GPS receiver GPS-E3329
The GPS-E3329 is a high sensitive GPS receiver that can be connected to a ML-x17ADS data logger. The GPS-E3329 is based on the high performance features of the MediaTek 3329 single-chip architecture and has a 'Fast time to first fix', which is obviously a very important property in low power data logging applications.
Option boards ML-OI/OC
More or special inputs can be added to an ML-x17 by means of internal stackable option boards/converters.
PA66/IP68 waterproof external USB connector ML-PMB
The PBM is a pole mounting bracket made of tough UV-stabilized polycarbonate, which is better than using a metal bracket as the metal can have a negative impact on the performance of integrated antennas (poor antenna performance causes more power consumption). The bracket can be used to mount an ML-x17 data logger to poles with a diameter ranging from 35mm to 3" and bigger. The bracket is excluding mounting accessories like clamps, nuts, bolts and washers.
PA66/IP68 waterproof external USB connector ML-PMK
The PMK is a pole mounting kit existing out of a polycarbonate bracket (PMB), two 12mm width stainless steel (A2/W4/304) worm-gear clamps to fix the bracket to a pole with a diameter ranging from 40 (1 5/8") to 60mm (2 3/8"). The kit is including 4x M4 bolts (16mm), nuts and washers of stainless steel as well.